• Allows easy access with a pallet truck
• Positioned directly on a level floor
• No pit required
• Distance between legs 580mm
• CE marked and conform to EN 1570

This static electro-hydraulic "U" shape scissor table allows a Euro pallet to be placed on the platform by jacking up a pallet using a standard pallet truck, manoeuvring the pallet truck within the "U" section of the scissor table, releasing the pallet to rest on the platform then withdrawing the pallet truck. The pallet can then be raised to the required level. The opposite procedure is carried out to remove a pallet from the scissor table.

All low profile scissor tables have a remote power pack with a 2.5 m length hose between the table and the unit. The control box with a push button for up/down and the emergency stop is mounted on a unit with a 2 m cable. Lift tables are equipped with a safety trip bar on all sides.

The table requires a 3-phase electrical supply.

These low profile ramp models are used when lifting a non Euro pallet as the cross slates under the pallet would prevent the pallet truck from being withdrawn which is not the case using the "U" shape type.

The pallet truck with the loaded pallet attached is pushed up the access ramp and released onto the scissor platform. The pallet truck is then withdrawn down the ramp allowing the scissor table to raise the pallet to the required level.

All low profile scissor tables have a separate power unit with a 2.5 m length hose between the table and the unit. The control box with a push button for up/down and the emergency stop is mounted on a unit with a 2 m cable. lift tables are equipped with a safety trip bar on all sides.

• Access to platform via Ramp
• Positioned directly on a level floor
• No pit required
• Various platform sizes  are available
• All scissor tables are CE marked and conform to EU machine
  directory and EN 1570